Developing active and intelligent biodegradable packaging from food waste and byproducts: A review of sources, properties, film production methods, and their application in food preservation.

Food waste and byproducts (FWBP) are a global issue impacting economies, resources, and health. Recycling and utilizing these wastes, due to processing and economic constraints, face various challenges. However, valuable components in food waste inspire efficient solutions like active intelligent packaging. Though research on this is booming, its material selectivity, effectiveness, and commercial viability require further analysis. This paper categorizes FWBP and explores their potential for producing packaging from both animal and plant perspectives. In addition, the preparation/fabrication methods of these films/coatings have also been summarized comprehensively, focusing on the advantages and disadvantages of these methods and their commercial adaptability. Finally, the functions of these films/coatings and their ultimate performance in protecting food (meat, dairy products, fruits, and vegetables) are also reviewed systematically. FWBP provide a variety of methods for the application of edible films, including being made into coatings, films, and fibers for food preservation, or extracting active substances directly or indirectly from them (in the form of encapsulation) and adding them to packaging to endow them with functions such as barrier, antibacterial, antioxidant, and pH response. In addition, the casting method is the most commonly used method for producing edible films, but more film production methods (extrusion, electrospinning, 3D printing) need to be tried to make up for the shortcomings of the current methods. Finally, researchers need to conduct more in-depth research on various active compounds from FWBP to achieve better application effects and commercial adaptability.

Cerebrating and engagement, paths to reduce fresh produce waste within homes.

A real-world study was conducted with the aim to reduce people's fresh fruit and vegetables waste within their homes. For 6 weeks participants measured their fresh produce waste. Half the participants were impelled to complete food waste logs whilst the other half was a control group. This was followed by a 6-month monitoring period to establish if changes would last. Fresh produce waste decreased with over a quarter of what the participants had wasted at the beginning of the 6 weeks, for all groups. Additionally, an attitude questionnaire distributed at the onset and at the end of the study showed a shift in pro-reduction of food waste. As this indicated that thinking about food waste prompts engagement, we tested this idea using a different sample group. A questionnaire measuring attitudes and cognition confirmed the importance of thinking and provided further insight into the findings from the first study.

Whole genome sequencing analysis of Komagataeibacter nataicola reveals its potential in food waste valorisation for cellulose production.

BACKGROUND: Komagataeibacter nataicola (K. nataicola) is a gram-negative acetic acid bacterium that produces natural bacterial cellulose (BC) as a fermentation product under acidic conditions. The goal of this work was to study the complete genome of K. nataicola and gain insight into the functional genes in K. nataicola that are responsible for BC synthesis in acidic environments. METHODS AND RESULT: The pure culture of K. nataicola was obtained from yeast-glucose-calcium carbonate (YGC) agar, followed by genomic DNA extraction, and subjected to whole genome sequencing on a Nanopore flongle flow cell. The genome of K. nataicola consists of a 3,767,936 bp chromosome with six contigs and 4,557 protein coding sequences. The maximum likelihood phylogenetic tree and average nucleotide identity analysis confirmed that the bacterial isolate was K. nataicola. The gene annotation via RAST server discovered the presence of cellulose synthase, along with three genes associated with lactate utilization and eight genes involved in lactate fermentation that could potentially contribute to the increase in acid concentration during BC synthesis. CONCLUSION: A more comprehensive genome study of K. nataicola may shed light into biological pathway in BC productivity as well as benefit the analysis of metabolites generated and understanding of biological and chemical interactions in BC production later.

Relationship of black soldier fly larvae (BSFL) gut microbiota and bioconversion efficiency with properties of substrates.

Treating food waste using black soldier fly larvae (BSFL) is widely regarded as a promising nature-based measure. This study explored the influence of food waste particle sizes on substrate properties and its subsequent effects on bioconversion efficiency and gut microbiota. The results indicated that particle sizes mainly ranging from 4 mm to 10 mm (T1) significantly increased the weight loss rate of food waste by 35 % and larval biomass by 38 % compared to those in T4 (particle sizes mostly less than 2 mm) and promoted the bioconversion of carbon and nitrogen into larvae and gases. Investigation of substrates properties indicated that the final pH value of T1 was 7.79 ± 0.10, with Anaerococcus as the predominant substrate microorganism (relative abundance: 57.4 %), while T4 exhibited a final pH value of 5.71 ± 0.24, with Lactobacillus as the dominant microorganism (relative abundance: 95.2 %). Correlation analysis between substrate chemical properties and microbial community structure unveiled a strong relationship between substrate pH and the relative abundance of Anaerococcus and Lactobacillus. Furthermore, beneficial microorganisms such as Lactobacillus and Enterococcus colonized the BSFL gut of T1, while pathogenic bacterium Morganella, detrimental to BSFL gut function, was enriched in T4 (relative abundance: 60.9 %). Nevertheless, PCA analysis indicated that alterations in the gut microbial community structure may not be attributed to the substrate microorganisms. This study establishes particle size as a crucial parameter for BSFL bioconversion and advances understanding of the relationship between gut microbiota and substrate microbiota.

Investigating the sources and fate of per- and polyfluoroalkyl substances (PFAS) in food waste compost.

Composting municipal food waste is a key strategy for beneficially reusing methane-producing waste that would otherwise occupy landfill space. However, land-applied compost can cycle per- and polyfluoroalkyl substances (PFAS) back into the food supply and the environment. We partnered with a pilot-scale windrow composting facility to investigate the sources and fate of 40 PFAS in food waste compost. A comparison of feedstock materials yielded concentrations of ∑PFAS under 1 ng g-1 in mulch and food waste and at 1380 ng g-1 in leachate from used compostable food contact materials. Concentrations of targeted ∑PFAS increased with compost maturity along the windrow (1.85-23.1 ng g-1) and in mature stockpiles of increasing curing age (12.6-84.3 ng g-1). Among 15 PFAS quantified in compost, short-chain perfluorocarboxylic acids (PFCAs) - C5 and C6 PFCAs in particular - led the increasing trend, suggesting biotransformation of precursor PFAS into these terminal PFAS through aerobic decomposition. Several precursor PFAS were also measured, including fluorotelomer carboxylic acids (FTCAs) and polyfluorinated phosphate diesters (PAPs). However, since most targeted analytical methods and proposed regulations prioritize terminal PFAS, testing fully matured compost would provide the most relevant snapshot of PFAS that could be land applied. In addition, removing co-disposed food contact materials from the FW feedstock onsite yielded only a 37 % reduction of PFAS loads in subsequent compost, likely due to PFAS leaching during co-disposal. Source-separation of food contact materials is currently the best management practice for meaningful reduction of PFAS in food waste composts intended for land application.

Optimizing hydrothermal treatment for sustainable valorization and fatty acid recovery from food waste.

This study employs response surface methodology and a central composite design (CCD) to optimize hydrothermal treatment (HTT) conditions for the valorization of food waste (FW). Lab-scale pressure reactor-based HTT processes are investigated to detect the effects of temperature (220-340 °C) and resident time (90-260 min) on elemental composition and fatty acid recovery in the hydrothermal liquid. Central to the study is the identification of temperature as the primary factor influencing food waste conversion during the HTT process, showcasing its impact on HTT product yields. The liquid fraction, rich in saturated fatty acids (SFA), demonstrates a temperature-dependent trend, with higher temperatures favoring SFA recovery. Specifically, HTT at 340 °C in 180 min exhibits the highest SFA percentages, reaching up to 52.5 wt%. The study establishes HTT as a promising avenue for nutrient recovery, with the liquid fraction yielding approximately 95% at optimized conditions. Furthermore, statistical analysis using response surface methodology predicts the optimal achievable yields for hydrochar and hydrothermal liquid at 6.15% and 93.85%, respectively, obtained at 320 °C for 200 min.

Food waste tectonics: Points of friction between policy push and practice pull in council-led household-food-waste interventions in Australia.

Household food waste is increasingly recognised as a global wicked problem for its greenhouse gas emissions, economic damage, and resource loss. Although targeted in the UN's Sustainable Development Goals, countries can only respond according to their capacity. For Australia, national policy has put the pressure on states and territories to divert food waste away from landfill into a nascent circular economy. For councils, this increasingly means implementing a FOGO (Food Organics/Garden Organics) kerbside collection. Despite funding and infrastructure development, many are resisting. Framed by the tenets of policy diffusion, this paper presents the results of a nationwide exploratory survey aimed at identifying how and why council-based waste services staff resist, emulate or lead FOGO implementation. By assessing participants current kerbside systems and their attitudes towards household food waste management, the survey found costs, contamination, and capacity and were key concerns. However, responses to these varied considerably despite similarities of situation, often relating more to collaborative attitudes across waste services, council, and councillors. This paper recognises that a conducive environment for change is urgently needed for Australia to achieve organics diversion targets and shift household food towards a circular economy. It provides a starting point for further research into the complex and nuanced dynamics between council waste services and FOGO implementations, from external drivers and council paradigms to individual attitudes and perceptions.

Solidification/stabilization and optimization of municipal solid waste incineration fly ash with aluminosilicate solid wastes.

Alkali-activation is an effective municipal solid waste incineration fly ash (MSWIFA) solidification/stabilization (S/S) technology. However, the characteristics of calcium-rich silica-poor aluminum phase in MSWIFA easily cause the structural instability and contamination of alkali activated MSWIFA S/S bodies. Therefore, the aluminosilicate solid wastes are used in this work to optimize the immobilization and structural properties. Results showed that incorporation of aluminosilicate solid wastes significantly improved the compressive strength and heavy metals pollution toxicity of MSWIFA S/S bodies. Compared to alkali activated MSWIFA, the compressive strength of S/S bodies with addition of coal fly ash, silica fume and granulated blast furnace slag improved by 31.0%, 47.6% and 50.8% when the curing time was 28 days, respectively. Leachability of Pb, Zn and Cd in these alkali activated MSWIFA S/S bodies was far below the threshold value specified in Standard GB16889. Aluminosilicate solid wastes provided abundant Si/Al structural units, and some new phases such as ettringite(AFt, 3CaO⋅Al2O3⋅3CaSO4⋅32H2O), calcium sulfoaluminate hydrate (3CaO⋅Al2O3⋅CaSO4⋅12H2O) and Friedel's salt (CaO⋅Al2O3⋅CaCl2⋅10H2O) can be detected in S/S matrix with aluminosilicate solid wastes, along comes increased the amount of the amorphous phases. Lower Ca/Si molar ratio tended to form the network structure gel similar to tobermorite with higher polymerization degree. Meanwhile, the silica tetrahedron of the gels changed from the oligomerization state like island to the hyperomerization state like chain, layer network or three-dimensional structure, and average molecular chain length increased. These findings provide theoretical basis for structural properties optimization and resource utilization of MSWIFA S/S matrices.

Analysis of composition characteristics and treatment techniques of municipal solid waste incineration fly ash in China.

The rapid development of the economy and society is causing an increase in the amount of municipal solid waste (MSW) produced by people's daily lives. With the strong support of the Chinese government, incineration power generation has steadily become the primary method of treating MSW, accounting for 79.86%. However, burning produces a significant amount of municipal solid waste incineration fly ash (MSWI-FA), which contains heavy metals, soluble chlorine salts, and dioxins. China's MSWI-FA yield increased by 8.23% annually to 7.80 million tons in 2022. Besides, the eastern region, especially the southeastern coastal region, has the highest yield of MSWI-FA. There are certain similarities in the chemical characteristics of MSWI-FA samples from Northeast, North, East, and South China. Zn and CaO have the largest amounts of metals and oxides, respectively. The Cl content is about 20 wt%. This study provides an overview of the techniques used in the thermal treatment method, solidification and stabilization, and separation and extraction of MSWI-FA and compares their benefits and drawbacks. In addition, the industrial applications and standard requirements of landfill treatment and resource utilization of MSWI-FA in China are analyzed. It is discovered that China's resource utilization of MSWI-FA is insufficient through the study on the fly ash disposal procedures at a few MSW incineration facilities located in the economically developed Guangdong Province and the traditional industrial city of Tianjin. Finally, the prospects for the disposal of MSWI-FA were discussed.

Multi-stage aeration regime to regulate organic conversion toward gas alleviation and humification in food waste digestate composting.

Aerobic composting has been considered as a pragmatic technique to convert food waste digestate into high-quality biofertiliser. Nevertheless, massive gaseous emission and immature product remain the primary challenges in food waste digestate composting. Thus, the performance of multi-stage aeration regimes to improve gaseous emissions and organic humification during food waste digestate composting was investigated in this study. In addition to continuous aeration with a constant intensity of 0.3 L kg·dry mass (DM)-1·min-1, two multi-stage decreased aeration regimes were designed as "0.3-0.2-0.1" and "0.3-0.1-0.1" L·kg·DM-1·min-1 from the thermophilic to cooling and then mature stages, respectively. Results showed that the decreased aeration regimes could alleviate nitrous oxide (N2O) and ammonia (NH3) emission and slightly enhance humification during composting. The alleviated N2O and NH3 emission were mainly contributed by abiotically reducing gaseous release potential as well as biotically inactivating denitrifers (Pusillimonas and Pseudidiomarina) and proliferating Atopobium to reduce nitrate availability under lower aeration supply. The "0.3-0.2-0.1 L kg·DM-1·min-1" regime exhibited a more excellent performance to alleviate N2O and NH3 emission by 27.5% and 16.3%, respectively. Moreover, the decreased aeration regimes also favored the enrichment of functional bacteria (Caldicoprobacter and Syntrophomonas) to accelerate lignocellulosic biodegradation and thus humic acid synthesis by 6.5%-11.2%. Given its better performance to improve gaseous emissions and humification, the aeration regime of "0.3-0.2-0.1 L kg·DM-1·min-1" are recommended in food waste digestate composting in practice.

Do investments in phosphorus recovery from dairy processing wastewater pay off?

While phosphorus fertilizers contribute to food security, part of the introduced phosphorus dissipates into water bodies leading to eutrophication. At the same time, conventional mineral phosphorus sources are increasingly scarce. Therefore, closing phosphorus cycles reduces pollution while decreasing trade dependence and increasing food security. A major part of the phosphorus loss occurs during food processing. In this article, we combine a systematic literature review with investment and efficiency analysis to investigate the financial feasibility of recovering phosphorus from dairy processing wastewater. This wastewater is particularly rich in phosphorus, but while recovery technologies are readily available, they are rarely adopted. We calculate the Net Present Value (NPV) of investing in phosphorus recycling technology for a representative European dairy processing company producing 100,000 tonnes of milk per year. We develop sensitivity scenarios and adjust the parameters accordingly. Applying struvite precipitation, the NPV can be positive in two scenarios. First, if the phosphorus price is high (1.51 million EUR) or second if phosphorus recovery is a substitute for mandatory waste disposal (1.48 million EUR). However, for a variety of methodological specifications, the NPV is negative, mainly because of high input costs for chemicals and energy. These trade-offs between off-setting pollution and reducing energy consumption imply, that policy makers and investors should consider the energy source for phosphorus recovery carefully.

Modification of bentonite with black cotton soil and carboxyl methyl cellulose for the enhancement of hydraulic performance of geosynthetic clay liners.

Geosynthetic clay liners (GCLs) are mostly used as flow barriers in landfills and waste containments due to their low hydraulic conductivity to prevent the leachate from reaching the environment. The self-healing and swell-shrink properties of soft clays (expansive soils) such as bentonite enable them as promising materials for the GCL core layers. However, it is important to modify their physico-chemical properties in order to overcome the functional limitations of GCL under different hydraulic conditions. In the present study, locally available black cotton soil (BCS) is introduced in the presence of an anionic polymer named carboxymethyl cellulose (CMC) as an alternative to bentonite to enhance the hydraulic properties of GCL under different compositions. The modified GCL is prepared by stitching the liner with an optimum percentage of CMC along with various percentages of BCS mixed with bentonite. Hydraulic conductivity tests were performed on the modified GCL using the flexi-wall permeameter. The results suggest that the lowest hydraulic conductivity of 4.58 × 10-10 m/s is obtained when 25% of BCS is blended with bentonite and an optimum 8% CMC and further addition of BCS results in the reduction of the hydraulic conductivity.

[Effects of Application of Different Organic Materials on Phosphorus Accumulation and Transformation in Vegetable Fields].

Presently, the improvement of soil organic matter is the basis to ensure food security, but the accumulation and transformation characteristics of soil phosphorus (P) as affected by organic matter remain unclear. The accumulation, transformation, and migration characteristics of soil P in different soil layers of vegetable fields were researched under the application of organic materials. Six treatments were set up in the experiment:control (no fertilization), traditional fertilizer application by farmers, biochar, chicken manure, food waste, and straw application. Available phosphorus (Olsen-P), water-soluble phosphorus (CaCl2-P) content, soil phosphorus forms, soil organic matter (SOM), and pH were determined during the pepper harvest period. In the 0-5 cm and 5-10 cm soil layers, the available phosphorus content of traditional fertilization of farmers was higher, and the available phosphorus content of the four organic materials was in the order of straw > biochar > chicken manure > food waste. Compared to that with food waste, the straw and biochar treatments increased soil available phosphorus by 59.6%-67.3% and 29.1%-36.9%, respectively. The straw treatment could easily enhance the soil labile P pool, and soil labile P in the 0-5 cm soil layer increased by 47.3% and 35.1% compared with that under the chicken manure and food waste treatments, respectively. With the increase in soil depth, the proportion of available phosphorus in the chicken manure treatment decreased the least, and available phosphorus of the 20-30 cm soil layer accounted for 55.9% of the topsoil layer but only accounted for 16.0%-34.0% under treatment with the other three materials. Compared with that under the traditional fertilization of farmers, the pH significantly increased by 0.18-0.36 units after the application of organic fertilizer, and the pH of the chicken manure and food waste treatments was significantly higher than that of biochar and straw (P < 0.05). SOM content under the biochar treatment significantly increased by 7.7%-17.6% compared to that under the other three organic materials. Among the four organic materials, the straw treatment boosted the labile P pool the most, which was conducive to the rapid increase in plant-available P. Phosphorus was most likely to migrate downward under the chicken manure treatment. In the field management based on soil fertility enhancement, the application of biochar could not only improve soil pH and SOM but also avoid excessive accumulation of phosphorus in the surface layer, which decreases environmental risks.

The effects of gases from food waste on human health: A systematic review.

Food waste is a routine and increasingly growing global concern that has drawn significant attention from policymakers, climate change activists and health practitioners. Amid the plurality of discourses on food waste-health linkages, however, the health risks from food waste induced emissions have remained under explored. This lack of evidence is partly because of the lack of complete understanding of the effects of food waste emissions from household food waste on human health either directly through physiological mechanisms or indirectly through environmental exposure effects. Thus, this systematic review contributes to the literature by synthesizing available evidence to highlight gaps and offers a comprehensive baseline inventory of food waste emissions and their associated impacts on human health to support public health decision-making. Four database searches: Web of Science, OVID(Medline), EMBASE, and Scopus, were searched from inception to 3 May 2023. Pairs of reviewers screened 2189 potentially eligible studies that addressed food waste emissions from consumers and how the emissions related to human health. Following PRISMA guidelines, 26 articles were eligible for data extraction for the systematic review. Findings indicate that emissions from food waste, such as hydrogen sulphide, ammonia, and volatile organic carbons, can affect human endocrine, respiratory, nervous, and olfactory systems. The severity of the human health effects depends on the gaseous concentration, but range from mild lung irritation to cancer and death. This study recommends emission capture technologies, food diversion programs, and biogas technologies to reduce food waste emissions.

Bacillus subtilis SOM8 isolated from sesame oil meal for potential probiotic application in inhibiting human enteropathogens.

BACKGROUND: While particular strains within the Bacillus species, such as Bacillus subtilis, have been commercially utilised as probiotics, it is critical to implement screening assays and evaluate the safety to identify potential Bacillus probiotic strains before clinical trials. This is because some Bacillus species, including B. cereus and B. anthracis, can produce toxins that are harmful to humans. RESULTS: In this study, we implemented a funnel-shaped approach to isolate and evaluate prospective probiotics from homogenised food waste - sesame oil meal (SOM). Of nine isolated strains with antipathogenic properties, B. subtilis SOM8 displayed the most promising activities against five listed human enteropathogens and was selected for further comprehensive assessment. B. subtilis SOM8 exhibited good tolerance when exposed to adverse stressors including acidity, bile salts, simulated gastric fluid (SGF), simulated intestinal fluid (SIF), and heat treatment. Additionally, B. subtilis SOM8 possesses host-associated benefits such as antioxidant and bile salt hydrolase (BSH) activity. Furthermore, B. subtilis SOM8 contains only haemolysin toxin genes but has been proved to display partial haemolysis in the test and low cytotoxicity in Caco-2 cell models for in vitro evaluation. Moreover, B. subtilis SOM8 intrinsically resists only streptomycin and lacks plasmids or other mobile genetic elements. Bioinformatic analyses also predicted B. subtilis SOM8 encodes various bioactives compound like fengycin and lichendicin that could enable further biomedical applications. CONCLUSIONS: Our comprehensive evaluation revealed the substantial potential of B. subtilis SOM8 as a probiotic for targeting human enteropathogens, attributable to its exceptional performance across selection assays. Furthermore, our safety assessment, encompassing both phenotypic and genotypic analyses, showed B. subtilis SOM8 has a favourable preclinical safety profile, without significant threats to human health. Collectively, these findings highlight the promising prospects of B. subtilis SOM8 as a potent probiotic candidate for additional clinical development.

Environmental sustainability assessment of a new food waste anaerobic digestion and pyrolysis hybridization system.

This research conducted an environmental life cycle assessment (LCA) to evaluate an anaerobic digestion-co-pyrolysis (ADCo-Py) system in which pyrolysis was added to traditional food waste (FW) anaerobic digestion (AD) systems to treat the solid fraction and impurities separated from FW. The solid fraction, including impurities such as wooden chopsticks, plastics, eggshells, and bones, is usually incinerated, while pyrolysis can be a viable alternative to optimize FW treatment. The environmental impact of ADCo-Py was compared with stand-alone AD, pyrolysis, and ADCo-INC (AD with incineration of separated solids). The results indicated that both ADCo-Py (-1.726 kg CO2-Eq/kgFW) and ADCo-INC (-1.535 kg CO2-Eq/kgFW) outperform stand-alone AD (-0.855 kg CO2-Eq/kgFW) and pyrolysis (-0.181 kg CO2-Eq/kgFW) in mitigating global warming potential (GWP). Additionally, pretreatments were found to have the most significant influence on GWP, ecotoxicity potential (ETP), and acidification potential (AP). The two-step pretreatment in ADCo-Py, including the separation of solids and drying, significantly improved the environmental sustainability of the system when compared with standalone pyrolysis.

A Neoteric Paradigm to Improve Food Security: The Predictors of Women's Influence on Egocentric Networks' Food Waste Behaviors.

COVID-19, the most recent multi-dimensional global food crisis, challenged leadership and impacted individuals' personal networks. Two cross-sectional surveys were disseminated to women involved in their state's women's leadership committee to understand food waste behaviors. An egocentric network analysis was chosen as the methodology to better understand personal advice network characteristics and examine the impacts of Farm Bureau women's leadership committee members' advice networks on their food waste behavior. A multilevel model was conducted to identify factors related to respondents leading their network members toward positive food waste decisions. Independent variables included in the variables at the individual (e.g., each respondent's race, generation), dyadic (e.g., length respondent has known each member of her network), and network levels (e.g., proportion of the respondent's network that was female) were included in the model. Women were more likely to report connections with people they led to positive food waste behaviors and food security when: they had higher food waste sum scores, they were part of Generation X, the network member they led to more positive food waste behaviors was a friend, and if there were fewer women in their advice networks.

Contamination of aquatic ecosystems by persistent organic pollutants (POPs) originating from landfills in Canada and the United States: A rapid scoping review.

Persistent organic pollutants (POPs) are organic chemical substances that threaten human health and the planet's ecosystems due to their toxicity and their ability to remain intact for a long time, wide distribution throughout the environment, and accumulation and magnification in living organisms through the food chain. Discarded products from landfills and dumpsites are potential sources of POPs due to their persistence for several decades and constant release to surrounding environment. POPs in aquatic systems signal input predominantly from landfills, wastewater treatment plants, sewage, and urban runoff, suggesting a research gap to guide policies to address these unabated releases. This scoping review aims to rapidly identify the key concepts underpinning the containment, translation, and migration of POPs in Canadian and US landfill leachate. The review targeted multidisciplinary perspectives on the topic and spanned forensic biology, environmental sciences, chemistry, and geology. Contaminated municipal solid waste (MSW) landfill characteristics, as reported by government agencies in Canada and the US, were synthesized and harmonized to illustrate the geographical scope of MSW landfills releasing POPs into the surrounding environment. The knowledge and data gaps summarized in this study highlight the need to address the inadvertent release of POPs from Canadian and US landfills, particularly in consideration of dated and degrading landfill infrastructure, the proximity of marginalized people, and the implications of climate change on the countries' more vulnerable landscapes. This review is applicable to the development of future studies that aim to guide environmental protective policies.

Low-energy-consumption rapid synthesis of carbon dots at room temperature from combusted food waste with versatile analytical applications.

In this study, we developed a low-energy-consumption green method for synthesising carbon dots (CD) at room temperature using watermelon rind as the carbon source through a cutting process based on NaCl crystals. The synthesis process was rapid (<5 min) and facile. The synthesised CD were characterised using photoluminescence (PL) spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, energy-dispersive X-ray analysis and X-ray photoelectron spectroscopy. The results revealed that the synthesised dots exhibited robust adsorption, a spherical shape and a uniform size distribution. The PL intensity of the quantum dots decrease due to the temperature rising, metal ions and ponceau 4R added. In contrast with PH, PL intensity increase, so these CD can serve as multifunctional sensing materials. Overall, this study presents an environmentally friendly method for the rapid synthesis of CD that are suitable for temperature, pH, metal ion and food sensing applications.

Smart nano-inks based on natural food colorant for screen-printing of dynamic shelf life of shrimp.

Intelligent packaging embedded with food freshness indicators can monitor food quality and be deployed for food safety and cutting food waste. The innovative nano-inks for dynamic shelf-life printing based on natural food colorant with application in real-time monitoring of shrimp freshness were prepared. Co-assembly of saffron petal anthocyanin (SPA) with hydrophobic curcumin (Cur) into chitin nano-scaffold (particle sizes around 26 ± 8 nm) could deliver hindering SPA leaching, confirmed by FT-IR, FE-SEM, AFM, and color stability test. The best response to pH-sensitivity was found in a ratio of (1:4) Cur/SPA (30% (v/w) in ChNFs that was correlated with the chemical and microbial changes of shrimp during shrimp freshness. However, smart screen-printed inks signified higher responsiveness to pH changes than FFI films. Therefore, smart-printed indicators introduced the excellent potential for a short response time, easy, cost-effective, eco-friendly, co-assembly, great color stabilities, and lifetime for nondestructively freshness monitoring foods and supplements.